List of products by brand Ebotics

Maker Kit 1 Ebotics Robotics and Programming ▶️ tienda cpu
Last items in stock
Robotics

Maker Kit 1 Ebotics Robotics and Programming

Ebotics
BXMPJ02
€15.99
Maker Kits are sets of different electronic components that, controlled by the Build&Code 4in1 electronic board, complement each other to bring hundreds of inventions to life. By combining the components it is possible to build and schedule the projects included in each kit and many more. Maker Kits are ideal for those who take their first steps in...
Breakout Board for Microbit ▶️ tienda cpu
Robotics

Breakout Board for Microbit

Ebotics
BXBRKEF
€11.99
Micro:bit board adapter for connecting and controlling electronic components Ebotics.
LED Rainbows Ebotics For Mibo Ebotics ▶️ tienda cpu
Last items in stock
Robotics

LED Rainbows Ebotics For Mibo Ebotics

Ebotics
BXLEDMIBO
€9.99
This rainbow LED is specially designed for the Mibo robot. It is easily added to the robot thanks to the included expansion interface. It incorporates 8 LEDs of different colors.
Barometric Pressure Sensor Ebotics ▶️ tienda cpu
Robotics

Barometric Pressure Sensor Ebotics

Ebotics
BXSENSOREF4
€7.99
Atmospheric pressure is the force exerted by air (atmosphere) on the surface of the earth, which varies with temperature and altitude. The barometric pressure sensor reads absolute atmospheric pressure (barometric) and temperature. In this way it indirectly estimates the height above sea level.This device is compatible with the Build&Code 4in1 board...
Temperature Sensor Ebotics ▶️ tienda cpu
Robotics

Temperature Sensor

Ebotics
BXSENSOR15
€4.99
The temperature sensor has an internal resistance that changes value depending on the temperature. If you place the sensor in a cold place, less electricity will reach it (the controller plate will detect a value close to 0) than if you place it in a warm place (it will detect a value close to 1023).
Pir motion sensor ▶️ tienda cpu
Robotics

PIR Motion Sensor

Ebotics
BXSENSOR16
€4.99
With the motion sensor you will detect any changes in the vicinity of this component. It covers a range of up to 5 meters away.All living things exude heat and that heat is emitted in the form of infrared radiation, which can be detected with suitable devices, such as PIR (Passive Infrared) sensors. They are called passive because they do not emit...
IR Sensor Line Follower Ebotics ▶️ tienda cpu
Robotics

IR Sensor Line Follower Ebotics

Ebotics
BXSENSOR07
€4.99
The LINE Tracker IR Sensor is able to follow a black line on a white surface autonomously and without external control.This line tracker IR sensor is compatible with the Build&Code 4in1 EBOTICS board and allows you to follow a black (or white) line if placed in such a vehicle. It also allows you to activate different robotics and programming projects...
4-digit LED display and 7 Ebotics ▶️ tienda cpu
Robotics

4-digit LED display and 7 Ebotics

Ebotics
BXSENSOREF2
€4.99
The 4-digit, 7-segment LED display features 7 light devices (LEDs) that form an "8". By controlling the on and off of each LED, you can represent the number or letter you need.
Rotary Potentiometer Ebotics ▶️ tienda cpu
Robotics

Rotary Potentiometer Ebotics

Ebotics
BXSENSOR02
€4.83
A potentiometer is an electrical resistor with a variable resistance value with values from 0 to 1023.This potentiometer is compatible with the Build&Code 4in1 EBOTICS board and is ideal for endless robotics and programming projects, as it allows to control servo motors, motors, the light intensity of the LEDs and many other possibilities.
DC motor with ▶️ tienda cpu
Last items in stock
Robotics

DC engine with propeller

Ebotics
BXSENSOR14
€2.99
With this friendly propeller engine it is possible to do hundreds of projects safely for the little ones, as the blades are soft and safe.
Ultrasonic Distance Sensor Ebotics ▶️ tienda cpu
Robotics

Ultrasonic Distance Sensor Ebotics

Ebotics
BXSENSOR09
€2.99
This ultrasonic distance sensor detects any object within 2 cm to 450 cm. It is compatible with the Build&Code 4in1 EBOTICS board and is ideal for activating various robotics and programming projects such as a presence alarm.
Soil Moisture Sensor Ebotics ▶️ tienda cpu
Robotics

Soil Moisture Sensor Ebotics

Ebotics
BXSENSOR08
€2.99
The soil moisture sensor is used to control the level of moisture in the soil or soil of plants.This soil moisture sensor is compatible with the Build&Code 4in1 EBOTICS board and is perfect for activating and disabling various robotics and programming projects depending on the moisture of the earth.
Passive Buzzer Ebotics ▶️ tienda cpu
  • On sale!
Last items in stock
Robotics

Zumbador Pasivo Ebotics

Ebotics
BXSENSOR05
€2.99
A buzzer is an electroacoustic transducer that produces a continuous or intermittent sound of the same tone, usually high-pitched. This passive buzzer is compatible with the Build&Code 4in1 EBOTICS board and is perfect for robotics and programming projects that incorporate the sound of an alarm, an original melody or a sound that warns the user of a...
Rain and Steam Sensor Ebotics ▶️ tienda cpu
Robotics

Rain and Steam Sensor Ebotics

Ebotics
BXSENSOREF1
€2.99
Use this sensor to have your inventions turned on or off according to the registered humidity level. You will be able to check the water levels in the air thanks to this sensor in detailing it in your robot
LDR Analog Light Sensor Ebotics ▶️ tienda cpu
Last items in stock
Robotics

LDR Analog Light Sensor Ebotics

Ebotics
BXSENSOR01
€2.99
The light sensor has an internal resistance that changes value depending on the light that reaches it. It is compatible with the Build&Code 4in1 EBOTICS board and is ideal for robotics and programming projects whose operation depends on existing ambient light.
End-of-career sensor Ebotics ▶️ tienda cpu
Last items in stock
Robotics

End-of-career sensor Ebotics

Ebotics
BXSENSOREF3
€2.99
An end-of-run sensor is a contact sensor. It works by displaying an electrical signal when it detects the presence of mechanical movement.Connect it to any of the digital ports on the Build&Code 4in1 board. To guide you, look at the colors of the cables and the colors of the board terminals. Each cable must be connected to its color.
LED 5mm white ▶️ tienda cpu
Robotics

LED 5mm white

Ebotics
BXSENSOR12
€1.99
The acronym "LED" comes from the English acronym "Light Emitting Diode", which means "Light Emitting Diode". Light up your projects with this white LED.An LED is a semiconductor electrical component (diode). When traversed by a small current, the diode emits light.
LED 5MM Color Yellow Ebotics ▶️ tienda cpu
Robotics

LED 5MM Color Yellow Ebotics

Ebotics
BXSENSOR11
€1.99
An LED is a semiconductor electrical component (diode). When traversed by a small current, the diode emits light.This LED is compatible with the Build&Code 4in1 EBOTICS board and is ideal for lighting up endless robotics and programming projects.
RBG LED Ebotics ▶️ tienda cpu
Robotics

LED RGB

Ebotics
BXSENSOR13
€1.99
Have this RGB LED emit any color from the visible spectrum by combining the red (R: network), green (G: green), and blue (B: blue) values.An RGB LED is an LED that can emit light of any color from the combination of its three basic colors: red (Network), green (Green), blue (Blue). Depending on the tension you put on each pin, you can get the color mix...
LED 5MM Color Blue Ebotics ▶️ tienda cpu
Robotics

LED 5MM Color Blue Ebotics

Ebotics
BXSENSOR10
€1.99
An LED is a semiconductor electrical component (diode). When traversed by a small current, the diode emits light. This LED is compatible with the Build&Code 4in1 EBOTICS board and is ideal for lighting up endless robotics and programming projects.
5VDC Relay Module ▶️ tienda cpu
Last items in stock
Robotics

Relay 5VDC module

Ebotics
BXSENSOR17
€1.99
A relay is an electromagnetic switch, i.e. it is activated when it receives an electrical signal.Connect it to any of the digital ports on the Build&Code 4in1 board. To guide you, look at the colors of the cables and the colors of the board terminals. Each cable must be connected to its color.
Push button Ebotics ▶️ tienda cpu
Robotics

Push button Ebotics

Ebotics
BXSENSOR06
€1.99
A push button is an electrical operator that, when pressed, allows the passage of the electric current and, when it is no longer pressed, interrupts it.This pushbutton is compatible with the Build&Code 4in1 EBOTICS and is ideal for activating different robotics and programming projects. You can also create a control knob using multiple buttons.
LED 5Mm Color Red Ebotics ▶️ tienda cpu
Robotics

LED 5MM Color Green Ebotics

Ebotics
BXSENSOR04
€1.99
An LED is a semiconductor electrical component (diode). When traversed by a small current, the diode emits light. This LED is compatible with the Build&Code 4in1 EBOTICS board and is ideal for lighting up endless robotics and programming projects.
LED 5MM Color Red Ebotics ▶️ tienda cpu
Robotics

LED 5MM Color Red Ebotics

Ebotics
BXSENSOR03
€1.99
An LED is a semiconductor electrical component (diode). When traversed by a small current, the diode emits light.This LED is compatible with the Build&Code 4in1 EBOTICS board and is ideal for lighting up endless robotics and programming projects.
Product added to wishlist
Product added to compare.